Constituents / Prices

1. Mainparts
• 13 1/2" with 2 3/8" blade 312 € brass sides + 33 €
• 14 1/2" with 2 3/8" blade 322 € brass sides + 34 €
• 17 1/2" with 2 1/2" blade 358 € brass sides + 42 €
• 22 1/2" with 2 1/2" blade 460 € brass sides + 54 €

1. Bodyparts
   • Two side-plates in 4 mm steel or brass, machine-cutted outside with pre drilled holes in 4 mm, mushrooms for the center of motion for the lateral blade movement.
   • Plane sole in 6 mm steel with 90° machine-cutted outside and grooves for the dovetails, the anti scatter block riveted and the breaking through for the blade in twice 45° premilled
2. Blade in high alloyed steel and back-iron with screw, 2 1/2" wide and 4 or 5 mm thick is Chryogenic-hardened to 61 HRC and presharpened
3. Lever cap machine-cutted outside and screw
4. Handle in 3 pieces from palisander band-sawed front-block, back-handle pre-rounded, rear-base bandsawed with essential rivets and rivet bushings.

2. Adjuster / 105 €

3. Instructions for free